Mobile FilterBox 10 A ePTFE, complete unit for extracting dust and fumes, W 3 certified, 400 V
Item number: 304128W
- FilterBox ePTFE recommended for: welding fumes: MIG / MAG / TIG / electrode - solid wire, max. 350A, grinding dust / particles and dust in general Humidity + sticky extraction applications and higher alloys
- The FilterBox is the ideal solution for almost any welding fume or dust application, including TIG, MIG/MAG,FCAW or MMA welding or the extraction of non-flammable dusts or powders, including fibrous, slightly abrasive, sticky or hygroscopic applications. The FilterBox is not suitable for the filtration of combustible dusts or gases and should not be used in environments where these are present. A compressed air connection is required for welding applications.
- The FilterBox is equipped with the most advanced cleaning system on the market. This guarantees outstanding filter performance and service life. The complete range includes numerous variants, depending on the required capacity, equipment and filter type.
- Healthier working environment and higher productivity with optimised filter technology and efficient products
- W3-certified by independent institute - approval according to EN 15012
- Sturdy chassis with large swivel and brake castors. Housing in robust plastic
- Automatically operated, mechanical and pneumatic filter cleaning for long filter service life.
- With an LCP display and ability to check the operating status and set parameters via the menu
- Possibility to connect a pneumatic tool, an electric 1-phase tool or a welding sensor terminal to start the fan automatically.
- Automatic air flap that prevents dust from escaping during cleaning. Dust-free filter change and emptying of the dust container.
- Filter class M6 according to EN779
€6,226.00
Excl. VAT
Free shipping
Delivery Time: 4 - 5 weeks
We work hard to give you good advice!
+44 1952 811 991
Mon-Thu: 8:30am – 5:00pm | Fri: 8:30am – 4:00pm
Full service for your projects
- Needs analysis and free on-site consultation
- Planning & project management
- Production
- Transport, assembly & commissioning
- Service & maintenance
Product information
| Technical data | Details |
|---|---|
| External dimensions W x D x H [mm] | 800 x 1220 x 1280 |
| Version | Mobile |
| Material | Plastic |
| Colour | Blue |
| Sound level [dB(A)] | 66 |
| Nominal voltage [V] | 400 |
| Model | 10 A ePTFE |
| Separation efficiency of the filter | 99,9 |
| Weight [kg] | 102 |
| Operating temperature [°C] | 40 |
| Frequency [Hz] | 50 |
| Power [W] | 0 |
| Protection category ip | IP 54 |
| Operating temperature range max. [°C] | 60 |
- FilterBox ePTFE recommended for: welding fumes: MIG / MAG / TIG / electrode - solid wire, max. 350A, grinding dust / particles and dust in general Humidity + sticky extraction applications and higher alloys
- The FilterBox is the ideal solution for almost any welding fume or dust application, including TIG, MIG/MAG,FCAW or MMA welding or the extraction of non-flammable dusts or powders, including fibrous, slightly abrasive, sticky or hygroscopic applications. The FilterBox is not suitable for the filtration of combustible dusts or gases and should not be used in environments where these are present. A compressed air connection is required for welding applications.
- The FilterBox is equipped with the most advanced cleaning system on the market. This guarantees outstanding filter performance and service life. The complete range includes numerous variants, depending on the required capacity, equipment and filter type.
- Healthier working environment and higher productivity with optimised filter technology and efficient products
- W3-certified by independent institute - approval according to EN 15012
- Sturdy chassis with large swivel and brake castors. Housing in robust plastic
- Automatically operated, mechanical and pneumatic filter cleaning for long filter service life.
- With an LCP display and ability to check the operating status and set parameters via the menu
- Possibility to connect a pneumatic tool, an electric 1-phase tool or a welding sensor terminal to start the fan automatically.
- Automatic air flap that prevents dust from escaping during cleaning. Dust-free filter change and emptying of the dust container.
- Filter class M6 according to EN779
Matching accessories and spare parts
€6,226.00
Excl. VAT
Free shipping
to Mainland U.K.
Personal consultation
by our hazmat experts
14-day right of return
in accordance with the terms and conditions
Maintenance and spare parts service
directly from the manufacturer
